Conferencia

Bermeo, F.; Quintana, J.P.; Kleiman, A.; Sequeda, F.; Márquez, A. "1020 steel coated with Ti/TiN by Cathodic Arc and Ion Implantation" (2017) 8th International Congress of Engineering Physics. 792(1)
Estamos trabajando para incorporar este artículo al repositorio
Consulte el artículo en la página del editor
Consulte la política de Acceso Abierto del editor

Abstract:

TiN coatings have been widely studied in order to improve mechanical properties of steels. In this work, thin Ti/TiN films were prepared by plasma based immersion ion implantation and deposition (PBII&D) with a cathodic arc on AISI 1020 steel substrates. Substrates were exposed to the discharge during 1 min in vacuum for the deposition of a Tiunderlayer with the aim of improving the adhesion to the substrate. Then, a TiN layer was deposited during 6 min in a nitrogen environment at a pressure of 3xl0-4 mbar. Samples were obtained at room temperature and at 300 °C, and with or without ion implantation in order to analyze differences between the effects of each treatment on the tribological properties. The mechanical and tribological properties of the films were characterized. The coatings deposited by PBII&D at 300 °C presented the highest hardness and young modulus, the best wear resistance and corrosion performance. © Published under licence by IOP Publishing Ltd.

Registro:

Documento: Conferencia
Título:1020 steel coated with Ti/TiN by Cathodic Arc and Ion Implantation
Autor:Bermeo, F.; Quintana, J.P.; Kleiman, A.; Sequeda, F.; Márquez, A.
Filiación:Universidad Santiago de Cali, Cali, Colombia
Universidad de Buenos Aires, Facultad de Ciencias Exactas y Naturales, Departamento de Física, Buenos Aires, Argentina
Universidad de Buenos Aires, Consejo Nacional de Investigaciones Científicas y Técnicas, Instituto de Física Del Plasma (INFIP), Facultad de Ciencias Exactas y Naturales, Buenos Aires, Argentina
Universidad Del Valle, Cali, Colombia
Palabras clave:Coatings; Deposition; Ion implantation; Substrates; Titanium compounds; Titanium nitride; Tribology; Wear resistance; Cathodic arc; Corrosion performance; Mechanical and tribological properties; Nitrogen environment; Steel substrate; Ti/TiN film; Tribological properties; Young modulus; Ions
Año:2017
Volumen:792
Número:1
DOI: http://dx.doi.org/10.1088/1742-6596/792/1/012061
Título revista:8th International Congress of Engineering Physics
Título revista abreviado:J. Phys. Conf. Ser.
ISSN:17426588
Registro:https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_17426588_v792_n1_p_Bermeo

Referencias:

  • Boxman, R.L., Sanders, D.M., Martin, P.J., (1995) Handbook of Vacuum Arc Science and Technology, Fundamentals and Applications, , (Park Ridge, NJ: Noyes)
  • Lieberman, M., Lichtenberg, A., (2005) Principles of Plasma Discharges and Material Processing, pp. 152-154. , 2 (Hoboken, NJ: Wiley)
  • Giuliani, L., Bermeo, F., Lamas, D., Grondona, D., Kelly, H., Márquez, A., (2009) Rev. Latin. Am. Metal. Mater. S, 1, pp. 1073-1079. , 1073-79
  • Fazio, M., Kleiman, A., Lamas, D.G., Grondona, D., Márquez, A., (2014) J. Phys. Conf. Series, 511 (1)
  • Akkaya, S.S., Vasyliev, V.V., Reshetnyak, E.N., Kazmanli, K., Solak, N., Strel'Nitskij, V.E., Ürgena, M., (2013) Surf. Coat. Technol., 236, pp. 332-340
  • Lain, G.C., Cemin, F., Menezes, C.M., Aguzzoli, C., Baumvol, I.J.R., Tomiello, S.S., Figueroa, C.A., (2016) Surf. Eng., 32 (4), pp. 279-283A4 -

Citas:

---------- APA ----------
Bermeo, F., Quintana, J.P., Kleiman, A., Sequeda, F. & Márquez, A. (2017) . 1020 steel coated with Ti/TiN by Cathodic Arc and Ion Implantation. 8th International Congress of Engineering Physics, 792(1).
http://dx.doi.org/10.1088/1742-6596/792/1/012061
---------- CHICAGO ----------
Bermeo, F., Quintana, J.P., Kleiman, A., Sequeda, F., Márquez, A. "1020 steel coated with Ti/TiN by Cathodic Arc and Ion Implantation" . 8th International Congress of Engineering Physics 792, no. 1 (2017).
http://dx.doi.org/10.1088/1742-6596/792/1/012061
---------- MLA ----------
Bermeo, F., Quintana, J.P., Kleiman, A., Sequeda, F., Márquez, A. "1020 steel coated with Ti/TiN by Cathodic Arc and Ion Implantation" . 8th International Congress of Engineering Physics, vol. 792, no. 1, 2017.
http://dx.doi.org/10.1088/1742-6596/792/1/012061
---------- VANCOUVER ----------
Bermeo, F., Quintana, J.P., Kleiman, A., Sequeda, F., Márquez, A. 1020 steel coated with Ti/TiN by Cathodic Arc and Ion Implantation. J. Phys. Conf. Ser. 2017;792(1).
http://dx.doi.org/10.1088/1742-6596/792/1/012061