Referencias:

• Ostergaard, K., Adv. Chem. Eng. (1968), 7, p. 71; Satterfield, C.N., AIChE J. (1975), 21, p. 209; Shah, Y.T., Gas-Liquid-Solid Reactor Design, McGraw Hill (1979), New York; Ramachandran, P.A., Chaudhari, R.B., Three-Phase Catalytic (1983), Reactors, Gordon and Breach, New York; Gianetto, A., Silveston, P.L., Multiphase Chemical (1986), Reactors, Hemisphere, Washington, DC; Gianetto, A., Baldi, G., Specchia, V., Sicardi, S., AIChE J. (1978), 24, p. 1087; Hofmann, H.P., Catal. Rev. Sci. Eng. (1978), 17, p. 71; Tan, C.S., Smith, J.M., Lat. Am. J. Chem. Eng. Appl. Chem. (1981), 11, p. 59; Herskowitz, M., Smith, J.M., AIChE J. (1983), 29, p. 1; J. Hanika and V. Stanek, Operation and design of trickle bed reactors, in Handbook of Heat and Mass Transfer, Vol. 2: Mass Transfer and Reactor Design (N. P. Cheremisinoff, ed.), Ch. 24, Gulf Publishing, Houston, 1986; Sato, Y., Hirose, T., Takahashi, F., Toda, M., Hashiguchi, Y., J. Chem. Eng. Japan (1973), 6, p. 315; Charpentier, J.C., Favier, M., AIChE J. (1975), 21, p. 1213; Talmor, E., Aiche, J., (1977), 23 (868); Tosun, G., Ind. Eng. Chem. Process Des. Dev. (1984), 23, p. 29; Christensen, G., McGovern, S.J., Sundaresan, S., AIChE J. (1986), 32, p. 1677; Sicardi, S., Gerhard, H., Hofmann, H., Chem. Eng. J. (1979), 18, p. 173; Sicardi, S., Hofmann, H., Chem. Eng. J. (1980), 20, p. 251; Dimenstein, D.M., Zimmerman, S.P., Ng, K.M., Ch. 1 in Chemical and Catalytic Reactor Modelling, ACS Symp. Ser. 237 (1984), Washington, DC; Ng, K.M., AIChE J (1986), 32, p. 115; Specchia, V., Baldi, G., Chem. Eng. Sci. (1977), 32, p. 515; Otake, T., Okada, K., Kagaku Kogaku (1953), 17, p. 176; van Swaaij, W.P.M., Charpentier, J.C., Villermaux, J., Chem. Eng. Sci. (1969), 24, p. 1083; Saez, A.E., Carbonell, R.G., AIChE J. (1985), 31, p. 52; Michell, R.W., Furzer, I.A., Chem. Eng. J. (1972), 4, p. 53; Stegmuller, R., Cukierman, A.L., Lemcoff, N.O., Proc. 37th. Canadian Chemical Engineering Conference, Quebec (1987), p. 41; Larkins, R.P., White, R.R., Jeffrey, D.W., AIChE J. (1961), 7, p. 231; Abbott, M.D., Moore, G.R., Ralph, J.L., Paper S-5, 7th ABG Conference (1967); Midoux, N., Favier, M., Charpentier, J.C., J. Chem. Eng. Japan (1976), 2, p. 350; J. Friebe, Dissertation, Tech. Univ. Darmstadt, 1966; Hofmann, H., Chem.-Ing.-Tech. (1975), 47 (823); Wijfels, J.B., Verloop, J., Zuiderweg, F.J., Adv. Chem. Ser. (1974), 133, p. 151; Bennet, A., Goodridge, F., Trans. Inst. Chem. Eng. (1970), 48, p. T232; Schwartz, J.G., Weger, W., Dudukovic, M.P., AIChE J. (1976), 22, p. 894; Colombo, A.J., Baldi, G., Sicardi, S., Chem. Eng. Sci. (1976), 31, p. 1101; Specchia, V., Baldi, G., Gianetto, A., Ind. Eng. Chem. Process Des. Dev. (1978), 17, p. 362; Sicardi, S., Baldi, G., Gianetto, A., Specchia, V., Chem. Eng. Sci. (1980), 35, p. 67; Goto, S., Levee, J., Smith, J.M., Catal. Rev. Sci. Eng. (1977), 15, p. 187; Lu, P.Z., Smith, J.M., Herskowitz, M., AIChE J. (1984), 30, p. 500; Mason, E.A., Malinauskas, A.P., Evans, R.B., J. Chem. Phys. (1967), 46, p. 3199; Feng, C., Stewart, W.E., Ind. Eng, Chem. Fundam. (1973), 12, p. 143; R. Jackson, Transport in Porous Catalysts, Elsevier, Amsterdam, 1977; Cunningham, R.E., Williams, R.J.J., Diffusion in Gases and Porous Media, Plenum (1980), New York; Damkohler, G., Z. Phys. Chem. (1935), 174, p. 222; Wicke, E., Kallenbach, R., Kolloid, Z., (1941), 97 (135); Smith, J.M., AIChE J. (1968), 14, p. 650; Satterfield, C.N., Colton, C.K., Pitcher, W.H., Jr., AIChE J. (1973), 19, p. 628; Ferry, J.D., J. Gen. Physiol. (1936), 20, p. 95; Casassa, E.F., J. Polym. Sci. Part B (1967), 5, p. 773; Casassa, E.F., Tagami, Y., Macromolecules (1969), 2, p. 14; Colton, C.K., Satterfield, C.N., C.-J. Lai, AIChE J. (1975), 21, p. 289; Glandt, E.D., AIChE J. (1981), 27, p. 51; Friedman, L., Kraemer, E.O., J. Am. Chem. Soc. (1930), 52, p. 1295; Prasher, B.D., Ma, Y.H., AIChE J. (1977), 23, p. 303; Prasher, B.D., Gabriel, G.A., Ma, Y.H., AIChE J. (1978), 24, p. 1118; Chantong, A., Massoth, F.E., AIChE J. (1983), 29, p. 725; Ramachandran, P.A., Smith, J.M., AIChE J. (1979), 25, p. 538; Mills, P.L., Dudukovic, M.P., Chem. Eng. Sci. (1980), 35, p. 2267; Herskowitz, M., Carbonell, R.G., Smith, J.M., AIChE J. (1979), 25, p. 272; Dudukovic, M.P., Mills, P.L., ACS Symp. Ser. (1978), 387 (65); Tan, C.S., Smith, J.M., Chem. Eng. Sci. (1980), 35, p. 1601; Herskowitz, M., Chem. Eng, Sci. (1981), 36, p. 1665; Mills, P.L., Erk, H.F., Evans, J., Dudukovic, M.P., Chem. Eng. Sci. (1981), 36, p. 947; Cukierman, A.L., Lemcoff, N.O., Chem. Eng. Comm. (1981), 11, p. 219; Cukierman, A.L., Lemcoff, N.O., Lat. Am. J. Chem. Eng. Appl. Chem. (1981), 11, p. 159; Goto, S., Lakota, A., Levee, J., Chem. Eng. Sci. (1981), 36, p. 157; Martinez, O.M., Ferretti, O.A., Lemcoff, N.O., Chem. Eng. Sci. (1984), 39, p. 391; Bischoff, K.B., AIChE J. (1965), 11, p. 351; Gonzo, E.E., Gottifredi, J.C., Catal. Rev. Sci. Eng. (1983), 25, p. 119; Capra, V., Sicardi, S., Gianetto, A., Smith, J.M., Can. J. Chem. Eng. (1982), 60, p. 282; Ring, Z.E., Missen, R.W., Can. J. Chem. Eng. (1986), 64 (1), p. 117; Yentekakis, I.V., Vayenas, C.G., Chem. Eng. Sci. (1987), 42, p. 1323; Mears, D.E., Adv. Chem. Ser. (1974), 133, p. 218; Dudukovic, M.P., AIChE J. (1977), 23, p. 940; Mills, P.L., Dudukovic, M.P., Ind. Eng. Chem. Fundam. (1979), 18, p. 139; Sakornwimon, W., Sylvester, N.D., Ind. Eng. Chem. Process Des. Dev. (1982), 21, p. 16; Lu, P.Z., F. Han-Yu., and J. M. Smith, AIChE J. (1984), 30, p. 818; Rony, P.R., Chem. Eng. Sci. (1968), 23, p. 1021; Rony, P.R., J. Catal. (1969), 14, p. 142; Martinez, O.M., Barreto, G.F., Lemcoff, N.O., Chem. Eng. Sci., 36, 901 (1981). [80] M. Herskowitz, Chem. Eng. Sci. (1981), 36, p. 1099; Stegmuller, R., Cukierman, A.L., Lemcoff, N.O., Chem. Eng. Commun. (1986), 41, p. 291; Gabitto, J.F., Laborde, M.A., Lemcoff, N.O., Lat. Am. J. Heat Mass Transf. (1985), 9, p. 75; Stanek, V., Hanika, J., Hlavacek, V., Trnka, O., Chem. Eng. Sci. (1981), 36, p. 1045; Goto, S., Smith, J.M., AIChE J. (1978), 24, p. 294; Goto, S., Watabe, S., Matsubara, M., Can. J. Chem. Eng. (1976), 54, p. 551; Shah, Y.T., Paraskos, J.A., Chem. Eng. Sci. (1975), 30, p. 1169; Ruecker, C.M., Mensik, M.A., Akgerman, A., Chem. Eng. Commun. (1986), 41, p. 279; Hanika, J., Sporka, R., Ruzicka, V., Hrstka, J., Chem. Eng. J. (1976), 12, p. 193; Kim, D.H., Kim, Y.G., J. Chem. Eng. Japan, 14 (1981), 311, p. 318; Hanika, J., Lukjanov, B.N., Kirillov, V.A., Stanek, V., Chem. Eng. Commun. (1986), 40, p. 183; Herskowtiz, M., Chem. Eng. J. (1981), 22, p. 167; Mata, A.R., Smith, J.M., Chem. Eng. J. (1981), 22, p. 229; Herskowitz, M., Chem. Eng. Sci. (1985), 40, p. 1309; Bondi, A., Chem. Technol. (1971), p. 185; Ross, L.D., Chem. Eng. Progr. (1965), 61, p. 77; Henry, G.H., Gilbert, J.B., Ind. Eng. Chem. Process Des. Dev. (1973), 12, p. 328; Puranik, S.S., Vogelpohl, A., Chem. Eng. Sci. (1974), 29, p. 501; Sylvester, N.D., Pitayagulsarn, P., AIChE J. (1973), 19, p. 640; Sylvester, N.D., Pitayagulsarn, P., Can. J. Chem. Eng. (1974), 52, p. 539; Susuki, M., Smith, J.M., AIChE J. (1970), 16, p. 882; Komiyama, H., Smith, J.M., AIChE J. (1975), 21, p. 664; Hartman, M., Coughlin, R.W., Chem. Eng. Sci. (1972), 27, p. 867; Goto, S., Smith, J.M., AIChE J. (1978), 24, p. 286; Goto, S., Mabuchi, K., Can. J. Chem. Eng. (1984), 62, p. 865; Berruti, F., Hudgins, R.R., Rhodes, E., Sicardi, S., Can. J. Chem. Eng. (1984), 62, p. 644; Turek, F., Lange, R., Chem. Eng. Sci (1981), 36, p. 569; Sicardi, S., Baidi, G., Specchia, V., Mazzarino, I., Gianetto, A., Chem. Eng. Sci. (1981), 36, p. 226; Goto, S., Smith, J.M., AIChE J. (1975), 21, p. 706; Klassen, J., Kirk, R.S., AIChE J. (1955), 1, p. 488; Hsu, S.H., Ruether, J.A., Ind. Eng. Chem. Process Des. Dev. (1978), 17, p. 524; Della Martina, L., Baidi, G., Sicardi, S., Specchia, V., Atti Acc. delle Scienze di Torino (1982), 116, p. 413; Sato, Y., Hirose, T., Takahashi, F., Toda, M., PACHEC′72, Section 8 (1972), 187; Tukac, V., Mazzarino, I., Baidi, G., Gianetto, A., Sicardi, S., Specchia, V., Chem. Eng. Sci. (1986), 41, p. 17; Baidi, G., Gianetto, A., Sicardi, S., Specchia, V., Mazzarino, I., Can. J. Chem. Eng. (1985), 63, p. 62; Babcock, B.D., Mejdell, G.T., Hougen, O.A., AIChE J. (1957), 3, p. 366; Satterfield, C.N., Ma, Y.H., Sherwood, T.K., Inst. Chem. Eng. Symp. Ser. (1968), 28, p. 22; Germain, A.H., Lefebvre, A.G., L'Homme, G.A., Chemical Reaction Engineering II, Adv. Chem. Ser (1974), 133, p. 164; El-Hisnawi, A.A., Dudukovic, M.P., Mills, P.L., ACS Symp. Ser. (1982), 196, p. 421; Mills, P.L., Dudukovic, M.P., ACS Symp. Ser. (1984), 237, p. 37; Herskowitz, M., Mosseri, S., Ind. Eng. Chem. Fundam. (1983), 22, p. 4; Beaudry, E.G., Dudukovic, M.P., Mills, P.L., AIChE J. (1987), 33, p. 1435; Schuit, G.C.A., Gates, B.C., AIChE J. (1973), 19, p. 417; Paraskos, J.A., Frayer, J.A., Shah, Y.T., Ind. Eng. Chem. Process Des. Dev. (1975), 14, p. 315; Shah, Y.T., Paraskos, J.A., Ind. Eng. Chem. Process Des. Dev. (1975), 14, p. 368; Montagna, A.A., Shah, Y.T., Paraskos, J.A., Ind. Eng. Chem. Process Des. Dev. (1977), 16, p. 152; Iannibello, A., Marengo, S., Burgio, G., Baldi, G., Sicardi, S., Specchia, V., Ind. Eng. Chem. Process Des. Dev. (1985), 24, p. 531; Goto, S., Smith, J.M., AIChE J. (1975), 21, p. 714; Levee, J., Smith, J.M., AIChE J. (1976), 22, p. 159; Dharwadkar, A., Sylvester, N.D., AIChE J. (1977), 23, p. 376; Dwivedi, P.N., Upadhyay, S.N., Ind. Eng. Chem. Process Des. Dev. (1971), 16, p. 157; Tan, C.S., Smith, J.M., AIChE J. (1982), 28, p. 190

Citas:

---------- APA ----------

---------- CHICAGO ----------

---------- MLA ----------

---------- VANCOUVER ----------