Abstract:
Ni-W-MoS2 composite coatings were obtained by pulse plating from a Ni-W electrolyte containing suspended MoS2 particles. The coating composition, morphology, crystalline structure, microhardness and frictional behavior were studied as a function of MoS2 concentration. The results obtained in this study indicate that co-deposited lubricant particles strongly influenced the composite Ni-W coating properties. It was found that increasing co-deposited MoS2 diminished tungsten content in the coating and consequently increased the average grain size. Ni-W nanostructured coatings with high MoS2 content have a porous sponge-like structure, high surface roughness and irregular frictional behavior. However, the friction coefficient of Ni-W coatings is reduced to half its value with low MoS2 content. © 2009 Elsevier B.V. All rights reserved.
Registro:
Documento: |
Artículo
|
Título: | Characterization and frictional behavior of nanostructured Ni-W-MoS2 composite coatings |
Autor: | Cardinal, M.F.; Castro, P.A.; Baxi, J.; Liang, H.; Williams, F.J. |
Filiación: | Surface Chemistry and Coatings Department, TENARIS Research and Development Centre, Simini 250, Campana, 2804, Argentina Departamento de Química Inorgánica, Analítica y Química Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria, C1428EGA Buenos Aires, Argentina Department of Mechanical Engineering, Texas A and M University, College Station, TX 77843-3123, United States
|
Palabras clave: | Coating; Electrodeposition; MoS2; Nanostructured; Ni-W; Solid lubricant; Average grain size; Coating compositions; Crystalline structure; Friction coefficients; Frictional behavior; MoS2; Nanostructured; Nanostructured coatings; Nanostructured Ni; Ni-W; Ni-W coatings; Pulse plating; Spongelike structure; Tungsten content; Electroplating; Friction; Molybdenum compounds; Nickel; Protective coatings; Solid lubricants; Surface roughness; Surface structure; Tungsten; Composite coatings |
Año: | 2009
|
Volumen: | 204
|
Número: | 1-2
|
Página de inicio: | 85
|
Página de fin: | 90
|
DOI: |
http://dx.doi.org/10.1016/j.surfcoat.2009.06.037 |
Título revista: | Surface and Coatings Technology
|
Título revista abreviado: | Surf. Coat. Technol.
|
ISSN: | 02578972
|
Registro: | https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_02578972_v204_n1-2_p85_Cardinal |
Referencias:
- Ramesh Bapu, G.N.K., (1995) Plating Surf. Finish., p. 70
- Pushpavanam, M., Natarajan, S.R., (1995) Met. Finish., p. 97
- Chang, Y.C., Chang, Y.Y., Lin, C.I., (1998) Electrochim. Acta, 43, p. 315
- Berçot, P., Pena-Munoz, E., Pagetti, J., (2002) Surf. Coat. Technol., 157, p. 282
- Szeptycka, B., Gajewska-Midzialek, A., (2007) Rev. Adv. Mater. Sci., 14, p. 135
- Surender, M., Basu, B., Balasubramaniam, R., (2004) Tribol. Int., 37, p. 743
- Lee, H.K., Lee, H.Y., Jeon, J.M., (2007) Surf. Coat. Technol., 201, p. 4711
- Vaezi, M.R., Sadrnezhaad, S.K., Nikzad, L., (2008) Colloids Surf., A: Physicochem. Eng. Asp., 315, p. 176
- Burzyńska, L., Rudnik, E., Koza, J., Błaz, L., Szymański, W., (2008) Surf. Coat. Technol., 202, p. 2545
- Yamasaki, T., Schloßmacher, P., Ehrlich, K., Ogino, Y., (1998) Nanostruct. Mater., 10 (3), p. 375
- Schuh, C.A., Nieh, T.G., Iwasaki, H., (2003) Acta Mater., 51, p. 431
- A.J. Detor, C.A. Schuh, Acta Mater. 55 (2007) 371 and A.J. Detor, C.A. Schuh, Acta Mater. 55 (2007) 4221; Eliaz, N., Sridhar, T.M., Gileadi, E., (2005) Electrochim. Acta, 50, p. 2893
- Obradovic, M.D., Bosnjakov, G.Z., Stevanovic, R.M., Maksimovic, M.D., Despic, A.R., (2006) Surf. Coat. Technol., 200, p. 4201
- K.R. Sriraman, S.G.S. Raman, S.K. Seshadri, Materials Science and Engineering A 418 (2006) 303-311 and Materials Science and Engineering A 460-461 (2007) 39; Yao, Y., Yao, S., Zhang, L., Wang, H., (2007) Mater. Lett., 61, p. 67
- Yao, Y.W., Yao, S.W., Zhang, L., (2008) Mater. Sci. Technol., 24 (2), p. 237
- Subba Rao, G.V., Schafer, M.W., (1979) Intercalated Layered Materials, p. 99. , Levy F. (Ed), Reidel, Dordrecht
- Zhang, Z., Zhou, F., Lavernia, E.J., (2003) Metall. Mater. Trans. A, 34 A, p. 1349
- Iwasaki, H., Higash, K., Nieh, T.G., (2004) Scr. Mater., 50, p. 395
- Giga, A., Kimoto, Y., Takigawa, Y., Higashi, K., (2006) Scr. Mater., 55, p. 143
- Yamasaki, T., (2000) Mater. Phys. Mech., 1, p. 127
- Schuh, C.A., Nieh, T.G., Yamasaki, T., (2002) Scr. Mater., 46, p. 735
Citas:
---------- APA ----------
Cardinal, M.F., Castro, P.A., Baxi, J., Liang, H. & Williams, F.J.
(2009)
. Characterization and frictional behavior of nanostructured Ni-W-MoS2 composite coatings. Surface and Coatings Technology, 204(1-2), 85-90.
http://dx.doi.org/10.1016/j.surfcoat.2009.06.037---------- CHICAGO ----------
Cardinal, M.F., Castro, P.A., Baxi, J., Liang, H., Williams, F.J.
"Characterization and frictional behavior of nanostructured Ni-W-MoS2 composite coatings"
. Surface and Coatings Technology 204, no. 1-2
(2009) : 85-90.
http://dx.doi.org/10.1016/j.surfcoat.2009.06.037---------- MLA ----------
Cardinal, M.F., Castro, P.A., Baxi, J., Liang, H., Williams, F.J.
"Characterization and frictional behavior of nanostructured Ni-W-MoS2 composite coatings"
. Surface and Coatings Technology, vol. 204, no. 1-2, 2009, pp. 85-90.
http://dx.doi.org/10.1016/j.surfcoat.2009.06.037---------- VANCOUVER ----------
Cardinal, M.F., Castro, P.A., Baxi, J., Liang, H., Williams, F.J. Characterization and frictional behavior of nanostructured Ni-W-MoS2 composite coatings. Surf. Coat. Technol. 2009;204(1-2):85-90.
http://dx.doi.org/10.1016/j.surfcoat.2009.06.037